Technical parameters of the G20-1000 metal expansion mesh machine

1 Total data:
1.1 Purpose of Use
The equipment is designed for the production of metal expansion nets. The production of metal mesh boards can be continuous mesh boards,
It can also be a discontinuous board.
1.2 Device Life
The typical operating life of this equipment is 20 years. Conditions of use are 2 shifts, 6 days a week, 50 weeks a year.
1.3 Processed materials
Material: cold plate, stainless steel, copper plate, aluminum plate.
Thickness: min 0.1mm; Max. 0.6mm.

2 Total data of net drawing machine
2.1 Tensile pressure: 200kN
2.2 Maximum material thickness: 0.6mm
2.3 Maximum material width: 1000mm
2.4 Adjustment range of upper and lower tool rest: 0-3mm
2.5 stroke length: 5.0mm
2.6 Stroke frequency: 50-600 times/min

3 Servo drive:
3.1 Servo feed motor 1, servo swing motor 1, spindle servo motor 2.
3.2 Feed roller diameter: 80mm
3.3 Number of support rollers: 2
3.4 Feed length adjustment: 0.01mm
3.5 Programmable feed length: 0.01-10mm
3.6 Feed accuracy (not cumulative) : ±0.01mm
3.7 Maximum feed speed: 5m/min
3.8 Servo pendulum length: 0.2-3mm
3.9 Servo swing tool accuracy: ±0.01mm
3.10 Servo swing speed: 0-600 times /min

4 Mesh size (long pitch × short pitch) :
4.1 Minimum: 0.75 x 1.5mm
4.2 Minimum mesh production speed: 400-600 times /min
4.3 Max. : 5.0×10.0mm(according to customer requirements)
4.4 Maximum mesh production speed: 200-400 times /min

5 Power::
5.1 Spindle servo motor: 7.0*2=14KW
5.2 Feed servo feed motor: 5.0KW
5.3 Pendulum servo motor: 7.0KW
5.4 Lubrication preheating constant temperature system: 2.5KW
5.5 Total power: 30KW