Technical parameters of the G40-1250 metal expansion mesh machine

1  Total data:
1.1 Purpose of Use
The equipment is designed for the production of metal expansion nets. The production of metal mesh board can be continuous mesh board, or it can be interrupted mesh board.
1.2 Device Life
The typical operating life of this equipment is 20 years. Conditions of use are 2 shifts, 6 days a week, 50 weeks a year.
1.3 Processed materials
Material: cold plate, stainless steel, copper plate net, aluminum plate net.
Thickness: min. 0.15mm; Max. 2.0mm.

2  Total data of net drawing machine:
2.1 Tensile pressure: 400kN
2.2 Maximum material thickness: 2.0mm
2.3 Maximum material width: 1250mm
2.4 Adjustment range of upper and lower tool rest: 0-5mm
2.5 stroke length: 10mm
2.6 Stroke frequency: 50-450 times/min

3  Servo drive:
3.1 One servo feed motor and one servo swing motor
3.2 Feed roller diameter: 100mm
3.3 Number of support rollers: 2
3.4 Feed length adjustment: 0.01mm
3.5 Programmable feed length: 0.01-20mm
3.6 Feed accuracy (not cumulative) : ±0.01mm
3.7 Maximum feed speed: 5m/min
3.8 Servo pendulum length: 0.2-10mm
3.9 Servo swing tool accuracy: ±0.01mm
3.10 Servo swing speed: 0-500 times /min

4  Mesh size (long pitch × short pitch) :
4.1 Minimum: 1.0 x 2.0mm
4.2 Minimum mesh production speed: 350-450 times /min
4.3 Max. : 10.0×20.0mm(according to customer requirements)
4.4 Maximum mesh production speed: 100-350 times /min

5  Power::
5.1 Spindle motor: 22KW
5.2 Feed servo feed motor: 5.5KW
5.3 Pendulum servo motor: 7.5KW
5.4 Lubrication preheating constant temperature system: 2.3KW
5.5 Total power: 38KW